System Time - Dahua Modular VTO User Manual

Parameter
Upload
Record
Click "OK" to save the settings.
Step 3

7.7.6 System Time

Set system date format, time format, system time and NTP server.
Select "System Config >Local Config > System Time".
Step 1
The system displays "System Time" interface, as shown in Figure 7-36.
Step 2 Set parameters and refer to
Step 3
Date Format
Time Format
System Time
Sync PC
DST Enable
DST Type
Start Time
End Time
Description
Press [1] to leave a picture/message. The system will upload the
contents to FTP and messages are available at "Visitors' Message" tab.
Talk
Reserved function.
Figure 7-36
Parameter
Table 7-9
Description
Set date display format, including Year-Month-Day,
Month-Day-Year and Day-Month-Year.
Set time display format, including 12-hour standard
and 24-hour standard.
Set present system date and time of VTO.
System time shall not be changed arbitrarily;
otherwise, it may fail to inquire records and
snapshots or release info. Before changing system
time, please stop recording or disable auto snapshot.
Click "Sync PC", so system time and local PC time
are consistent.
Some countries or regions follow daylight-saving
time (DST). Choose to enable DST or not according
to actual needs:
Tick "DST Enable" to enable DST function.
1.
Select "DST Type", including "Date" and "Week".
2.
74