Dahua Modular VTO User Manual page 36

Step 4 Set according to actual network access mode.
 Static IP
Select "Static IP".
1.
Enter "Local IP", "Subnet Mask" and "Gateway".
2.
DHCP

Select "DHCP" to obtain IP address automatically.
Step 5 Click [OK] to save the settings.
5.1.2.3 Product Info Settings
Set VTH "Room No.", "Type" and "Master IP".
Select "System Config>Project Settings".
Step 1
The system pops up "Password" prompt box.
Step 2 Enter the password set during initialization, and click [OK].
Step 3 Click [Product Info].
The system displays "Product Info" interface, as shown in Figure 5-15.
Figure 5-14
26