Personal Protective Equipment - SCHUNK VERO-S WDM-5X Assembly And Operating Manual

The following personnel qualifications are required for the various types of work on the
product:
Qualified electrician:
Electricians have professional training, knowledge, and experience that equip them to work
on electrical systems, recognize and avoid potential dangers, and they know the relevant
standards and regulations.
Specialist personnel:
Specialist personnel have the specialized training, knowledge, and experience to perform
the tasks entrusted to them, to recognize and avoid potential dangers, and know the
relevant standards and instructions.
Instructed person:
Instructed persons have been instructed by the user regarding the tasks entrusted to them
and the potential dangers of inappropriate behavior.
Manufacturer's service personnel:
The manufacturer's service personnel have the specialized training, knowledge, and
experience to perform the work entrusted to them and to recognize and avoid potential
dangers.
2.7
Use of personal protective equipment
Personal protective equipment serves to protect staff against danger which may interfere
with their health or safety at work.
• When working on and with the product, observe the occupational health and safety
regulations and wear the required personal protective equipment.
• Observe the valid safety and accident prevention regulations.
• Wear protective gloves to guard against sharp edges and corners or rough surfaces.
• Wear heat-resistant protective gloves when handling hot surfaces.
• Wear protective gloves and safety goggles when handling hazardous substances.
• Wear close-fitting protective clothing and also wear long hair in a hairnet when
dealing with moving components.
Basic safety instructions

Personal protective equipment

01.00|WDM 80 |en
10