Audio Tab; Panorama Or Balance Settings; Gain Settings; Equalization (Eq) Settings - Lightware MMX8x4-HT Series User Manual


  
5. Software Control – Lightware Device Controller
5.7. Audio Tab
MMX8x4-HT400MC and MMX8x4-HT420M model
This tab is for overview of the input and output audio settings. See
more details about the audio inputs and outputs in
section.
Audio tab in Crosspoint menu
Basic settings can be seen on the default view:
TIPS AND TRICKS: The entire view with full functionality of each
channel is available by clicking on the channel separator button.
Clicking on this button once again closes the advanced layout.
5.7.1. Panorama or Balance Settings
Panorama property is available
microphone input settings. It defines,
that the balanced microphone input is
Audio Interface
transmitted to the left or right channel
of the balanced analog output.
Balance parameter is available in advanced analog input, embedded
audio and advanced analog output channel.
Panorama and Balance can be set separately in each channel.
They can be configured three ways:
▪ Click on the knob and keep pressed the left button. Move the
cursor up or down to set the lower or higher value.
▪ Press + or - buttons to increase or decrease the value.
▪ Type the value into the text field.(L1-6 for the left side, R1-6 for
the right side, 0 means the center.)
TIPS AND TRICKS: Double click on the knob restore the default
value (0= center).
5.7.2. Gain Settings
See the advanced layout to reach all
adjustable properties.
Gain setting is for increase (or
decrease) the input signal level,
expressed in dB.
Gain values in microphone input channel:
Min. level: -12dB, max. level: +55dB, default level: 0dB. Steps: 1dB.
Gain values in advanced analog audio channel:
Min. level: -12dB, max. level: +21dB, default level: 0dB. Steps: 3dB.
These sections can be configured three ways:
Click on the knob and keep pressed the left button. Move the
▪
cursor up or down to set the lower or higher value.
▪ Press + or - buttons to increase or decrease the value.
Type the value into the text field.
▪
MMX8x4-HT series – User's Manual
in
PAN
+
-
L R
GAIN
dB
-12
-12 +55
5.7.3. Equalization (EQ) Settings
See the advanced layout to reach all
adjustable properties.
The equalizer section is for set the
-18
proper rate of the different frequencies.
EQ frequencies in microphone input channel:
HIGH: 12kHz; HIGH-MID: 1.6 kHz, LOW-MID: 400Hz, LOW: 120Hz.
EQ frequencies in the other advanced audio channels:
HIGH: 8kHz; HIGH-MID: 1.6 kHz, LOW-MID: 400 Hz, LOW: 100Hz.
EQ parameters can be set separately in each channel, the values are
between -18dB +18dB. Default level: 0dB (zero modification in the
original signal). Steps: 3dB.
These sections can be configured three ways:
Click on the knob and keep pressed the left button. Move the
▪
cursor up or down to set the lower or higher value.
▪ Press + or - buttons to increase or decrease the value. Steps: 3dB.
Type the value into the text field (between -18 and +18).
▪
TIPS AND TRICKS: Double click on the knob restore the default
value (0= center).
46
dB
0
+18