Features Of The Device - Lightware MMX8x4-HT Series User Manual


  
1. Introduction
1.5. Features of the Device
4K Video
Supporting uncompressed 4K UHD resolution at 30Hz
4:4:4 colorspace.
HDCP Compliant
Relevant inputs and outputs are fully HDCP compliant.
HDCP capability on the HDMI inputs can be disabled
when non-protected content is extended.
Advanced EDID Management
The user can emulate any EDID on the inputs
independently, read out and store any attached
monitor's EDID in internal memory locations, upload
and download EDID files using Lightware Device
Controller software.
Pixel Accurate Reclocking
Each output has a clean, jitter free signal, eliminating
signal instability and distortion caused by long cables
or connector reflections.
Frame Detector and Signal Analysis
The exact video and audio signal format can be
determined such as timing, frequencies, scan mode,
HDCP encryption, color range, color space and audio
sample rate.
Graphic Display and Rotary Jog Dial Control Knob
LCD Easy setting and menu navigation are assured by the
color graphic display and the comfortable jog dial
control.
Event Manager
The Event Manager tool takes care of all the necessary
control in a smaller configuration by performing
predefined actions in response to device status
changes. Hence, in a less complex environment, there
is no need to invest in additional control solutions,
which makes the matrix the best choice for numerous
applications.
MMX8x4-HT series – User's Manual
DSP
The built-in DSP in select Lightware products provides
audio mixer services including fader, ducking, equalizer,
mute, balance and gain.
Audio Embedder and De-embedder Function
The analog audio can be embedded to HDMI outputs
and embedded audio can be routed to the analog audio
output.
Advanced Audio
Analog audio signals are still widely used in AV
applications. The matrix switcher support direct analog
audio connections to ease system integration. Analog
audio ports feature volume and gain controls. These
controls help to interface with an audio subsystem or
if the ports are connected directly to audio sources or
speakers they provide easy sound adjustment.
Special Audio Input Block for Microphone and Line-in
Special Audio Input block with input ports for
microphone and line-in. The built-in sound mixer allows
for free mixing of the microphone, the line-in and the
de-embedded audio.
Infra
Infrared (IR) is a wireless technology used for device
communication over short ranges. Third party control
systems may send IR control commands to endpoints
turning them on and off or switching their inputs.
Relay
Controllable relay modules up to 30V, 1A support.
GPIO Control Port
6 GPIO pins operating at TTL digital signal levels and
can be controlled with both LW2 and LW3 commands.
Remote Power
The MMX8x4-HT420M matrix is PoE-compatible.
Power over Ethernet or PoE describes a standardized
system which pass electric power along with data on
twisted pair Ethernet (CAT) cabling. This allows a single
cable to provide both data connection and electric power
to remote devices.
Consumer Electronic Control
CEC
Supports transmitting standard CEC commands in
order to remote control the source or sink device.
9