Installing A Cable Management Bracket - Cisco ASR 9901 Hardware Installation Manual

Installing a Cable Management Bracket

Figure 88: Cisco ASR 9901 Router Cable Management Bracket
Note When shipped, the cable-management bracket is not attached to the router chassis. You must attach the
cable-management bracket to the chassis before you insert the cables into the ports.
Installing a Cable Management Bracket
To install a cable-management bracket, follow these steps:
Procedure
Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 2
Position the cable management bracket over the center holes of the chassis rack mount brackets (see the
following figure).
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
86
Installing Modules and Cables in the Chassis