Installing the Air Plenum Kit in a 19-inch Rack
Figure 74: Rear Grounding Bracket
Step 9
Install the Cisco ASR 9001 Router in the plenum assembly in the rack (see
Rack, on page 57
Step 10
After the chassis is installed, attach the cable guide to the front left side post of the rack. Fasten the cable
guide with one customer-supplied rack-mounting screw (see the figure below).
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
66
or
Installing the Chassis in a Four-Post Rack, on page
Unpacking and Installing the Chassis
Installing the Chassis in a Two-Post
59).