Unpacking and Installing the Chassis
Figure 60: Unpacking the Cisco ASR 9001 Router from the Shipping Container
1
2
3
Procedure
Step 1
Cut the packaging tape and open the cardboard shipping container.
Step 2
Remove the accessory box.
Step 3
Remove the packaging material (see the below figure).
a) Remove the foam packaging material from the top of the router.
b) Remove the cardboard cap from the side of the router.
Cardboard packaging
4
container
Accessory tray
5
Foam packaging material-
top caps
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
Unpacking the Router
Cardboard cap
Foam packaging material
- bottom cap
47