Installing And Removing Modular Port Adapters - Cisco ASR 9901 Hardware Installation Manual

Installing Modules and Cables in the Chassis
Figure 86: 1-Port 40 Gigabit Ethernet Modular Port Adapter
1 A/L (Active/Link) LED
The following table describes the 1-Port 40 Gigabit Ethernet modular port adapter LEDs.
Table 12: 1-Port 40 Gigabit Ethernet Modular Port Adapter LEDs
LED Label
A/L
STATUS

Installing and Removing Modular Port Adapters

These sections describe how to install or remove modular port adapters (MPAs) on the Cisco ASR 9001
Router.
2 STATUS LED
Color State Meaning
Off Off Port is not enabled.
Green On Port is enabled and the link is up.
Amber On Port is enabled and the link is down.
Off Off Modular port adapter power is off.
Green On Modular port adapter is ready and operational.
Amber On Modular port adapter power is on and good, and the modular port adapter is being
configured.
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
Installing and Removing Modular Port Adapters
79