Safety Guidelines - Cisco ASR 9901 Hardware Installation Manual

Preparing for Installation
Cisco ASR 9001-S Router
The Cisco ASR 9001-S Router is a 60 Gbps variant of the Cisco ASR 9001 Router. Similar to other routers
in the Cisco ASR 9000 Series, running Cisco IOS XR software images, the Cisco ASR 9001-S Router delivers
the features and services found on the ASR 9000 Series platforms, allowing customers to standardize on the
same Cisco IOS XR image. The Cisco ASR 9001-S Router comes standard with one modular bay (BAY 0)
that supports either a 1 GE, 10 GE, or 40 GE modular port adapters (MPAs). The chassis also comes usable
with two fixed SFP+ ports (SFP+0 and SFP+1). The second MPA slot (BAY 1) and other two SFP+ ports
(SFP+2 and SFP+3) are disabled and covered with dust caps by default. It supports the same set of features
and scaling for each NPU as does the Cisco ASR 9001 Router. The following figure shows the front panel of
the Cisco ASR 9001-S Router.
Figure 3: Front Panel of the Cisco ASR 9001-S Router
In order to achieve the full bandwidth of 120 Gbps and to enable the disabled ports, a Cisco license can be
obtained. Once the license is obtained and installed, the Cisco ASR 9001-S Router must be reloaded to bring
up the full 120 Gbps capacity. For information on configuring the Cisco license for Cisco ASR 9001-S Router,
see the
Note
The Cisco ASR 9001-S Router follows the same hardware installation procedure as the procedure for the
Cisco ASR 9001 Router, described in this document.

Safety Guidelines

Before you perform any procedure in this publication, you must review the safety guidelines in this section
to avoid injuring yourself or damaging the equipment.
Note that this section contains guidelines, and do not include every potentially hazardous situation. When you
install a router, always use caution and common sense.
General Safety Guidelines
• Never attempt to lift an object that might be too heavy for you to lift by yourself.
• Always disconnect the power source and unplug all power cables before lifting, moving, or working on
• Keep the work area clear and dust free during and after installation.
• Keep tools and router components away from walkways and equipment rack aisles.
• Do not wear loose clothing, jewelry (including rings and chains), or other items that could get caught in
• Fasten your tie or scarf and sleeves.
Cisco ASR 9001-S 120G Upgrade License Configuration Guide
the router.
the router.
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
Safety Guidelines
.
3