Rp Port Specifications - Cisco ASR 9901 Hardware Installation Manual

Technical Specifications
Parameter
Nominal
Minimum
Power
Minimum (one power module)
Maximum (two power modules)

RP Port Specifications

Table 26: RP Port Specifications
Description
Console port
Auxiliary port
Management ports (0, 1)
Sync ports (0, 1)
Power Consumption Specifications
The following table lists the power consumption specifications for a fully configured chassis.
Caution Be sure that the chassis configuration complies with the required power budgets. Failure to properly verify
the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales
representative for assistance.
Value
12 VDC
11.4 VDC
Cisco ASR 9001—750 W
Cisco ASR 9901—1600
W
Cisco ASR 9001—1500
W
Cisco ASR 9901—3200
W
Value
EIA/TIA-232 RJ-45 interface, 115200 Baud, 8 data, no parity, 1 stop bit with
software handshake (default)
EIA/TIA-232 RJ-45 interface, 115200 Baud, 8 data, no parity, 1 stop bit with
software handshake (default)
Triple-speed (10M/100M/1000M) RJ-45
Can be configured as one of the following:
• BITS (Building Integrated Timing System) port
• J.211 or UTI (Universal Timing Interface) port
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
RP Port Specifications
147