Rp Front Panel Indicators - Cisco ASR 9901 Hardware Installation Manual

Troubleshooting the Installation
4
5

RP Front Panel Indicators

The RP on the Cisco ASR 9901 has 9 discrete LED indicators for display of system information. The RP on
the Cisco ASR 9001 has 8 discrete LED indicators for display of system information.
The following table lists the display definitions of the discrete LEDs on the RP front panel as well as the
normal LED states on the power modules (AC or DC) and the fan tray after a successful system startup.
Table 17: RP Discrete LED Display Definitions
Indicator (Label)
RSP FAIL
LC FAIL
(Cisco ASR 9001)
LC STAT/INPUT OK
(Cisco ASR 9901)
Critical Alarm (CRIT)
Major Alarm (MAJ)
Minor Alarm (MIN)
CONSOLE and AUX
ports
Management LAN ports
LED Color
Bi-color Red
Green
Off
Red
Bi-color
Green
Off
Red
Bi-color
Green
Off
Single color Red
Off (Default after
reset)
Single color Red
Off (Default after
reset)
Single color Amber
Off (Default after
reset)
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
9
Description
RSP in initializing or failed state.
RSP is up and running.
RSP is normal.
LC in initializing or failed state.
LC is up and running.
LC is normal.
LC in initializing or failed state.
Note: When power is connected to the chassis but the chassis
power switch is set to the OFF position, the LED is red and
all other LEDs are off.
LC is up and running.
LC is powered off. The LED might turn off momentarily
when switching between the states described above, although
the LC has not powered off.
Critical Alarm LED. A critical alarm has occurred.
No critical alarm has occurred.
Major alarm LED. A major alarm has occurred.
No major alarm has occurred.
Minor alarm LED. A minor alarm has occurred.
No minor alarm has occurred.
RP Front Panel Indicators
Line Card SFP+ ports
117