Management Lan Port Led Indicators - Cisco ASR 9901 Hardware Installation Manual

Management LAN Port LED Indicators

• Autonegotiation of port speed (10/100/1000) and duplex (full/half) is supported. Autonegotiation cannot
The following table lists the signals used on the Management LAN ports.
Table 6: RP Management LAN Port Signals
MGT LAN Port Pin
1
2
3
4
5
6
7
8
Management LAN Port LED Indicators
The Management LAN connectors have integral LED indicators (see the following figure). When lit, these
LEDs indicate:
• Green (LINK)—Connection is alive.
• Amber (ACT)—Connection is active.
Figure 55: RP Management LAN Port LED Indicators
Management LAN RJ-45 Cabling
When connecting the RJ-45 port to a hub, repeater, or switch, use the straight-through cable pinout shown in
the following figure.
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
40
be disabled.
10Base-T, 100Base-TX Signal
Transmit+
Transmit–
Receive+
—
—
Receive–
—
—
1000Base-T Signal
BI_DA+
BI_DA–
BI_DB+
BI_DC+
BI_DC–
BI_DB–
BI_DD+
BI_DD–
Preparing for Installation