Dc Electrical Specifications - Cisco ASR 9901 Hardware Installation Manual

DC Electrical Specifications

Cisco ASR 9001 AC Electrical Specifications
Description
Power modules per system
Total AC input power
Rated input voltage
Note
Rated input line frequency
Input current rating
Source AC service requirement
Redundancy
DC Electrical Specifications
Cisco ASR 9901 DC Electrical Specifications
Description
Power modules per system
Total DC input power per power
module
Rated input voltage per power
module
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
144
Value
Up to two AC power modules per system
765 VA (volt-amps) per AC power supply (up to two AC power supply
modules per system)
100–240 VAC nominal (range: 90 to 264 VAC)
For each AC power 220–240 VAC (UK)
supply module.
50/60 Hz nominal (range: 47 to 63 Hz)
50/60 Hz (UK)
15 A maximum at 100 VAC
13 A maximum at 220 to 240 VRMS (UK)
15 A North America and Japan; 10 A international; 13 A UK
Power redundancy requirements vary, based on system configuration
(number and type of line cards, etc). AC and DC powered systems are
N+1 protected.
Value
Up to two DC power modules per system
1600 W
–48 VDC nominal in North America
–60 VDC nominal in the European Community
(range: –40.5 to –72 VDC [–75 VDC for 5 ms])
Technical Specifications