Cable Management Tray—Cisco Asr 9001 - Cisco ASR 9901 Hardware Installation Manual

Cable Management Tray Cisco ASR 9001
Cable Management Tray Cisco ASR 9001
A cable-management tray is mounted at the bottom of the Cisco ASR 9001 Router chassis for routing interface
cables to the RP. The following figure shows a typical cable routing through the cable-management tray.
Figure 92: Example Cable Routing through the Cisco ASR 9001 Router Cable Management Tray
Installing a Cable Management Tray
To install a cable-management tray, follow these steps:
Procedure
Step 1 Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
Step 2
Position the cable-management tray at the bottom of the chassis front panel.
Cisco ASR 9901, ASR 9001, and ASR 9001-S Routers Hardware Installation Guide
90
Installing Modules and Cables in the Chassis