2.3) Code Reader; F Ct; Functions; Bupc Functions In "Bio" Mode [ B ] - Nice Bupc Operating Instructions And Warnings

2.3) Code reader [

The BUPC programming unit is equipped with an optical reading system for transmitter codes, while unit MOU fea-
tures a proximity reading system for Card codes. Direct code reading is useful in order to check the transmitter or
Card and in all functions that call for the code to be entered.
Table 5: Optical reading of a transmitter code with unit BUPC
To use this function plug the optical reader [10] or [11] into the relative socket [4] and then bring the transmitter
illuminated indicator into proximity of the optical read head as shown in the figure.
The optical reader with extension cable [11] allows you to hold the programming unit on one side and read the opti-
cal code of transmitters without having to remove them from the package.
2
Table 6: Proximity reading of a card code with unit MOU
To use this function simply bring a Card into close proximity with the reading position [5] as shown in the figure
3

3) Functions [ ] [ ] [ ] [ ]

The BUPC and MOU programming units provide the facility to execute a series of operations designated: "FUNC-
TIONS". Depending on the type of programming unit and the relative operating mode, the functions may be different
both in terms of quantity and the way in which they can be used. The following chapters contain an analysis of all the
functions subdivided according to the specific palm-top programming unit and the operating mode.
Chapter 3.1 BUPC in "Bio" mode
Chapter 3.2 BUPC in "FloR" mode
Chapter 3.3 MOU in "Mom" mode
Chapter 3.4 MOU in "Mot" mode
3.1) BUPC functions in "Bio" mode [
This chapter contains an analysis of the functions of the BUPC palm-top programming unit in "Bio" mode
6
] [ ]
B F
C
B F T
]
B