Technical Specifications - Nice Bupc Operating Instructions And Warnings

5) Technical specifications [ ] [ ] [ ] [ ]

NICE S.p.a. observes a continuous improvement policy and reserves the right to modify the technical specifications
at any time without notice. In such cases specified functionality and intended use will not be affected.
Note: all technical specifications refer to a temperature of 20°C.
Product type BUPC:
Product type MOU:
Technology:
Connections:
Communication with PC:
Power supply:
Battery charge duration:
Battery life:
Enclosure protection rating:
Operating temperature:
Dimensions:
Weight:
B F
Codes programming and checking unit for type "Bio" and "FloR" remote
control systems
Codes programming and checking unit for access control systems with
"Morx" decoder
8-bit processor, 4 Mhz, 16K Rom, 33 I/0, 2 serial ports. 16 x 2 character dot
matrix LCD display. Soft-touch membrane keypad
For BM 60, BM 250 or BM1000 memory cards
BUPC only: connector for Bio, FloR and Very VR transmitter adapter.
Standard RS 232 interface, 9600 Bps 8-1-N
Internal with 6V 700mAh rechargeable battery.
External 12 Vdc ± 25% with supplied mains power units
Approximately 10 hours of operation or 3 months in stand-by mode.
At least 100 drain/charge cycles
IP20 (use only in protected indoor surroundings)
-20°C + 55°C
210 x 100 ( 80) h 25mm
350g
C T
GB
19