How To Use Models Bupc And Mou; [ B ][ F ][ C ][ T ]; Symbols; 2.2) Language Selection - Nice Bupc Operating Instructions And Warnings

2) How to use models BUPC and MOU [ ] [ ] [ ] [ ]

Palm-top programming units BUPC and MOU are supplied with power by internal rechargeable batteries; to switch
on the unit simply press the "POWER" key; at startup the unit will execute a brief TEST routine that performs diag-
nostics on the main internal components, after which it is ready for use. BUPC and MOU switch off automatically after
1 minute during which no commands are executed; to switch off the units manually simply hold down the "POWER"
key for at least 1 second. After powering on the unit and when the initial TEST routine is terminated the display pres-
ents the "FUNCTION MENU" from which it is possible to execute all the available functions including the selection
between the "Bio" or "FloR" modes on the BUPC programming unit and selection between the "Mom" and
"Mot" modes on the MOU programming unit.

2.1) Symbols [

] [
B
A series of graphic symbols is displayed in the window at the bottom left corner of the screen identifying the opera-
tions that can be performed or the keys that can be used in the current stage of the procedure
Table 3: Description of symbols
Indicates that the "
Indicates that the "
Indicates that the "
Indicates that the "
Indicates that the "
FUNCTION MENU.
Indicates that the "
function.
Only on BUPC; transmitter code optical reading is active; simply bring the transmitter up to the reader
T
X
with a key pressed.
Only on MOU; transponder Card code reading is active; simply bring the card up to the reader
C
A
Indicates that keypad-based numerical data input is active; you can therefore type a number directly by
1
9
means of the numerical keys 0, 1, 2, 3...9.
The bottom right corner of the screen contains an additional 2 symbols; the first indicates the battery charge level: a
solid rectangle denotes a fully charged battery; the rectangle gradually empties as the battery discharges until a com-
pletely empty rectangle appears when the battery is completely drained. The second symbol describes the current
version as shown in the table:
Table 4: Operating modes for BUPC and MOU
Symbol BUPC MOU
B
F
C
T

2.2) Language selection [

Palm-top programming units BUPC and MOU are prearranged to function with different languages so that the oper-
ator can display messages in his preferred language. The language selection operation can be activated by pressing
the " Enter" key during the test routine executed when the programming unit is switched on. When the initial test
is concluded, press the "
interface language by means of the "
language will be permanently stored in the memory and from this time on all messages will be presented in this lan-
guage.
] [ ] [ ]
F C T
" key can be pressed to select the next function or code.
" key can be pressed to select the previous function or code.
" key can be pressed to move the cursor to the right when entering numbers.
" key can be pressed to move the cursor to the left when entering numbers.
Clear" key can be pressed to abandon the current function and return to the
Enter" key can be pressed to activate the selected function or confirm the current
Description of parts
Symbol identifying operation in "Bio" version
Symbol identifying operation in "FloR" version
Symbol identifying operation in "Mom" version
Symbol identifying operation in "Mot" version
] [ ] [ ] [
B F C
Enter" key to activate the language selection function; here, you can select the preferred
" or " " keys, confirming the selection by pressing "
B F
]
T
C T
Enter"; the selected
GB
5