F Ct; Description; Components Of Bupc And Mou Palm-Top - Nice Bupc Operating Instructions And Warnings

1) Description [ ] [ ] [ ] [ ]

Palm-top programming units BUPC and MOU are compact portable computers designed by Nice to extend and sim-
plify the operations of installation and maintenance of radio remote control systems of the "Bio", "FloR" and "Very VR"
series, for the BUPC unit, or access control systems of the "Mom" and "Mot" series, for the MOU unit.
The basic function of the palm-top programming units is that of interacting directly with memory cards BM60, BM250
or BM1000 of the receivers or decoders in which the operating parameters and codes are stored.
Once it has been downloaded to the programming unit, the memory can be displayed, compiled, edited, and
processed. In addition, various accessory functions are available such as the facility to change the code of a trans-
mitter or a Card. The BUPC and MOU programming units also provide the facility to make a backup copy of the entire
memory or, if connected to a PC, they can transfer the memory contents into a file on disk so that a backup archive
can be created of all installed systems.
1.1) Components of BUPC and MOU palm-top programming units [
Depending on the type of device (BUPC or MOU), the package contains the parts described in the following figure
and table
1
Table 2: List of parts and accessories of BUPC and MOU
N° BUPC MOU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4
B F C
Description of parts:
Programming unit ON/OFF key
Socket for connection cable for transmitters [12] or [13]
LCD display presenting the messages relative to the functions performed by the operator
Socket for optical code reader of transmitters [10] or [11]
Reader for transponder Cards
Power – battery charger socket [16]
Plug-in connector for memory cards type BM60, BM250 or BM1000
RS 232 connector for link-up with a PC using cable [15]
Membrane keypad – light pressure is sufficient to activate the keys
Description of accessories:
Transmitter optical code reader (must be connected to socket [4])
Transmitter optical code reader with flexible extension
Cable for connection with "Bio" and "FloR" series transmitters (must be inserted in connector [2])
Cable for connection with "Very VR" series transmitters
RS232 cable for connecting the programming units to a PC (on connector [8])
CD-Rom containing the BUPC3 program for PC
230V - 12V 300 mA battery charger / power supply
T
] [ ] [ ] [ ]
B F C T