Maintenance; Cleaning The P-725; Customer Service - PI PIFOC P-725 series User Manual

Page 15 / 25

Maintenance

NOTICE
Misalignment from loosening screws on the base body!
The P-725 is maintenance-free and precisely aligned.
 Only loosen screws according to the instructions in this manual.
 Do not open the P-725.

Cleaning the P-725

Requirements
 You have discharged the piezo actuators of the P-725.
 You have disconnected the P-725 from the controller.
Cleaning the P-725
 Clean the surface of the P-725 with a cloth that is lightly dampened with a mild cleanser or
disinfectant (e.g., ethanol or isopropyl alcohol).
 Do not do any ultrasonic cleaning.

Customer Service

For inquiries and orders, contact your PI sales engineer or send us an email (info@pi.ws).
 If you have questions concerning your system, have the following information ready:
−
Product and serial numbers of all products in the system
−
Firmware version of the controller (if present)
−
Version of the driver or the software (if present)
−
Operating system on the PC (if present)
 If possible: Take photographs or make videos of your system that can be sent to our customer
service department if requested.
The latest versions of the user manuals are available for download on our website (www.pi.ws).
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe/Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws
2018-11-13
P725T0010, valid for P-725