P-725.Xcd, P-725.Xca, P-725.Cdd; Maximum Ratings - PI PIFOC P-725 series User Manual

Page 24 / 25

P-725.xCD, P-725.xCA, P-725.CDD

Figure 14: Sub-D 7W2 (m) connector, front view
Pin Signal
A1 inner conductor Input
A2 inner conductor Output
A2 outer conductor GND
1 Bidirectional
2 GND
3 Input
4 N.C.
5 Input
The connector shell is connected to the cable shield.

Maximum Ratings

The P-725 is designed for the following maximum ratings:
Model Maximum operating
voltage
P-725.1xx -20 to 120 V
P-725.2xx -20 to 120 V
P-725.4xx -20 to 120 V
P-725.xDD -20 to 120 V
Physik Instrumente (PI ) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe/Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,
Function
Piezo voltage +
Probe sensor signal
(nonmoving part of the capacitive sensor)
Shield
Data line for ID chip
Shield of Target
Ground of ID chip when switched on
Piezo voltage –
Not connected
Target sensor signal
(movable part of the capacitive sensor)
Maximum operating
frequency (unloaded)
150 Hz
100 Hz
75 Hz
300 Hz
www.pi.ws
2018-11-13
P725T0010, valid for P-725
Maximum power
consumption
13 W
17.4 W
17.4 W
4.7 W