Section 6: Maintenance; Schedule; Cleaning & Protecting; Lubrication - Grizzly G0845P Owner's Manual

SECTION 6: MAINTENANCE

To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.

Schedule

For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
• Loose mounting bolts.
• Damaged blades.
• Worn or damaged wires.
• Any other unsafe condition.
Every 8 Hours
• Lubricate the upper blade frame and gibs
(Page 33).
Every Month
• Lubricate the eccentric cam copper bushings
(Page 33).
• Lubricate the rear work stop support rods and
gear racks (Page 34).
• Lubricate the connecting rod pin shafts
( Page 34).
• Inspect V-belts for tension, damage, or wear
(Page 46).
• Clean/vacuum dust buildup from inside cabi-
net and off motor.
Every 6 Months
• Lubricate the main shaft roller bearings
(Page 35).
• Change the gearbox oil (Page 35).
-32-
Cleaning &
Protecting
Cleaning the Model G0845P is relatively easy.
Protect the unpainted cast-iron bed by wiping it
clean after every use. Keep the bed rust-free with
regular applications of products like G96
Treatment, SLIPIT , or Boeshield
®
31 for more details).

Lubrication

The Model G0845P has 10 grease fittings that are
used to lubricate moving parts of the machine with
Grizzly T26419—Syn-o-Gen High Speed Bearing
Grease.
Grease fittings for the gibs are on the upper blade
frame. Grease fittings for the main shaft bearings
and eccentric gear copper bushings are acces-
sible behind the front cover.
The connecting rod pin shafts are located just
above the rear cover.
For the oil-bath gearbox, use Grizzly T27914—
Moly-D Machine and Way Oil ISO 68. Changing
the gearbox oil requires removal of the front cover
and rear cover.
T26419
T27914
Figure 43. Recommended lubricants for Model
G0845P.
Model G0845P (Mfd. Since 01/18)
Gun
®
T-9 (see Page
®