Grizzly G0822 Manual Insert
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Power Tool
  5. G0822
  6. Manual insert
Grizzly G0822 Manual Insert

Grizzly G0822 Manual Insert

Variable-speed milling machine w/power feed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL G0822
VARIABLE-SPEED MILLING
MACHINE w/POWER FEED
MANUAL INSERT
For Machines Mfd. Since 6/17
The Model G0822 essentially the same machine as the Model G0802, but the G0822 is equipped with a
variable-speed 3-phase motor and an inverter/VFD (variable-frequency drive), which allows the machine to
operate on a single-phase power supply. Except for the differences noted in this insert, all other content in
the Model G0802 owner's manual applies to this machine.
: To reduce the risk of serious injury, you MUST read and understand this insert—and
the entire Model G0802 manual—BEFORE assembling, installing, or operating this machine!
If you have any further questions about this manual insert or the differences between the Model G0822
and the Model G0802, contact our Technical Support at (570) 546-9663 or email techsupport@grizzly.com.
COPYRIGHT © AUGUST, 2017 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JH18959 PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G0822 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Grizzly G0822

Summary of Contents for Grizzly G0822

  • Page 1 MANUAL INSERT For Machines Mfd. Since 6/17 The Model G0822 essentially the same machine as the Model G0802, but the G0822 is equipped with a variable-speed 3-phase motor and an inverter/VFD (variable-frequency drive), which allows the machine to operate on a single-phase power supply. Except for the differences noted in this insert, all other content in the Model G0802 owner's manual applies to this machine.

  • Page 2: Controls And Components

    Variable-Speed Dial: Controls spindle speed from 100–600 RPM (low) to 425–2500 RPM Downfeed Controls (high), depending on High/Low position of V-belt. Figure 1. G0822 control panel. Model G0822 (Mfd. Since 06/17)
  • Page 3 V-belt. Check V-belt tension by applying moderate pressure on belt with your finger between two The G0822 features two belt positions for High pulleys (see Figure 4). The proper amount (425–2500 RPM) and Low (100–600 RPM) spindle of belt deflection for this machine is approxi- speed operation.

  • Page 4: Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0822 VARIABLE‐SPEED MILLING MACHINE WITH POWER FEED Product Dimensions: Weight................................810 lbs. Width (side-to-side) x Depth (front-to-back) x Height................45 x 41 x 68 in.
  • Page 5 The information contained herein is deemed accurate as of 8/31/2017 and represents our most recent product specifications. Model G0822 PAGE 2 OF 3 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0822 (Mfd. Since 06/17)
  • Page 6 Electrical Cabinet Diagram Model G0822 (Mfd. Since 06/17)
  • Page 7 Main 106-1 106-2 106-3 84 83 106-4 102-2 102-3 102-7 102-8 102-4 102-5 102-9 102-6 102-1 100 101 Model G0822 (Mfd. Since 06/17)

  • Page 8: Main Parts List

    P0822130 STRAIGHT COUPLING M8-1 P0822072 X-AXIS LEADSCREW BRACKET P0822131 TUBING (NYLON) P0822073 CAP SCREW M6-1 X 45 P0822132 FLAT WASHER 6MM P0822074 INT THREADED TAPER PIN 8 X 50 P0822133 CAP SCREW M6-1 X 20 Model G0822 (Mfd. Since 06/17)
  • Page 9 Headstock 205-1 205-3 205-3 205-2 232 234 299 300 Model G0822 (Mfd. Since 06/17)

  • Page 10: Headstock Parts List

    SET SCREW M5-.8 X 6 P0822247 THRUST BEARING 51102 P0822300 SET SCREW M5-.8 X 6 P0822248 HEX NUT M14-1.5 THIN P0822301 DRAWBAR 7/16-20 P0822249 GRADUATED DIAL P0822302 SEAL P0822250 KNOB BOLT M5-.8 X 12 KN -10- Model G0822 (Mfd. Since 06/17)
  • Page 11 P0822431 BOTTLE FOR OIL P0822414 OFF BUTTON P0822432 T-BOLT M12-1.75 X 55 P0822415 SENSOR CIRCUIT BOARD P0822433 FLAT WASHER 12MM P0822416 ELECTRICAL BOX P0822434 HEX NUT M12-1.75 P0822417 TOOLBOX P0822435 DRIFT KEY P0822418 HEX WRENCH 6MM -11- Model G0822 (Mfd. Since 06/17)
  • Page 12 DO NOT REPRODUCE OR CHANGE THIS ARTWORK CAUTION PANTONE 109 C during operation. WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. artwork changes are required, contact us immediately at manuals@grizzly.com. WARNING! COPYRIGHT © GRIZZLY INDUSTRIAL, INC. FOR GRIZZLY MACHINES ONLY!

Table of Contents