Fluke Hydra Series II User Manual page 23

F
SHIFT
MON
tRIg
ALAr
On
OFF
CANCL
SHIFT
LIST
bAUd
38400
...
300
CANCL
G
Selecting Triggering Options. Press the SHIFT
key, release, then press the MON key to open
the TRIGS option menu.
trigger scanning, instead of using the SCAN key.
OFF indicates no triggering option; ON indicates
the external trigger option is active (a contact
closure or voltage transition between pins TR and
on the rear panel ALARM OUTPUTS connector);
ALAr (Alarm) indicates scan triggering when a
monitored channel goes into Alarm.
CANCL to exit. [Figure 2-19]
Setting the
Press the SHIFT key, release, then press the
LIST key to open the COMM menu.
communication parameters configure the rear-
panel RS-232 interface for printer and PC
operations. The first selection is bAUd (Baud)
with rates from 300 to 38400 baud.
complete procedure, this is followed by parity,
flow control and echo.
[Figure 5-2]
Ten Minute Tour (cont)
xxi
Ten Minute Tour
A trigger option can
Communication Parameters.
For the
Press CANCL to exit.
(continued)
Press
The
op79_7f.eps