Computer Operation; Printer Operation; Modem Operation - Fluke Hydra Series II User Manual

Data bucket
Table of Contents

Advertisement

2635A
Users Manual
personal computer (PC), where data can be sent from the Data Bucket to the PC over an
RS-232 link (up to a 38,400 baud rate), or the card can be removed and taken to a PC
equipped with a memory card reader (see Options and Accessories). Memory card
operations are discussed in Chapter 3.
SCAN Annunciator.
Indicates the instrument is
in the Scan mode (vs
Monitor or Review mode).
Memory Card Status.
Card has used 42% of its
capacity. After 99%, FULL
is displayed.

Computer Operation

The Data Bucket can serve as a front-end data acquisition unit for PC-based operations,
operating over an RS-232 link. The applications software for operating the RS-232 link
includes the supplied Hydra Starter Package (Starter) and optional Hydra Logger
(Logger) (see "Applications Software" below). Computer operations are discussed in
Chapter 4.

Printer Operation

Measurement data from the Data Bucket can be routed to a printer via an RS-232 link.
At the completion of each scan cycle, measurement data is printed, providing hardcopy
output. Any compatible printer with a serial input may be used. Printers with a parallel
input may be used if they are equipped with a serial-to-parallel adapter. Printer
operations are discussed in Chapter 5.

Modem Operation

An RS-232 link between the Data Bucket and a modem allows data transfers over
telephone lines. Operation is similar to computer operations, except there is a modem
link instead of a direct RS-232 connection. The modem may be electronic or
programmable/electronic (Hayes-compatible). Modem operations are discussed in
Chapter 6.
1-8
ALARM Annunciator.
Indicates that one (or
more) of the scanned
channels is in alarm.
SCAN
PRN (Print) Annunciator.
Indicates the destination
for the data is the memory
card or printer.
Figure 1-2. Typical Front Panel Display While Scanning
18 (Channel) Scanned.
Indicates the channel
being measured during
channel scanning.
ALARM
CH (Channel) Annunciator.
Indicates the number in the
secondary display is a
channel.
PRN CH
op02f.eps

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2635a

Table of Contents