Inputting Parameters; Setting With Digivex Pc Software; Outline - SSD Parvex DIGIVEX Little Drive Servoamplifier User And Commissioning Manual

DIGIVEX Little Drive Servoamplifier

6.2 Inputting Parameters

Customization parameters for the motor - amplifier unit are entered on start-up, using a PC with
the PME software, under WINDOWS.
The transition of this customization to a different calibre amplifier leads to the generation of a
fault. The parameters contained in the EEPROM are saved.

6.3 Setting with DIGIVEX PC Software

6.3.1 Outline

CURRENT LIMITATION,
SECOND ORDER FILTER, fc
NO PREDICTOR
This manual was downloaded on www.sdsdrives.com
+44 (0)117 938 1800 - info@sdsdrives.com
SELECT MOTOR/DRIVE COMBINATION
SELECT TYPE OF REGULATION
CURRENT
64
PVD 3530 GB 01/2005
SPEED (P/PI/PI=)
POSSIBLE SETTINGS
Max. Speed, Current limitation,
Speed for 1 Volt
FILTER fc & PROPORTIONAL GAIN P
ADJUSTMENT
(suppress resonance)
ENTER PI OR PI=
Set integral stop frequency
GRAVITY AND DRY FRICTION
PREDICTORS
DYNAMIC FRICTION AND
ACCELERATION PREDICTORS