Optional Accessories - SATO CT400 Operator And Technical Reference Manual

OPTIONAL ACCESSORIES

ACCESSORY
LABEL CUTTER
LABEL DISPENSER
LABEL REWINDER
SERIAL INTERFACE
ETHERNET INTERFACE
USB INTERFACE
COAX/TWINAX INTERFACE
All specifications subject to change without notice.
SATO CT Series Printers
CT400
Internal option allowing labels to be cut at specified intervals.
Controlled through programming. Factory installed only.
Internal option allowing labels to be peeled from backing for
immediate (on demand) application. Factory installed only.
External accessory rewinds labels onto a roll after they are printed.
High Speed RS232 Interface option, 9600 to 57.6KB. Factory
installed only.
TCP/IP Protocol Interface option. Factory installed only.
Universal Serial Bus Interface option. Factory installed only.
External Coax/Triax I/F Interface accessory. Coax I/F emulates an
IBM 3287-2 printer with a standard Type A BNC connector. Twinax
I/F emulates IBM 5224, 5225, 5226 or 4214 printers with
auto-terminate/cable-thru capabilities.
9001069A
Section 1. Printer Overview
CT410
Page 1-7