SATO CT400 Operator And Technical Reference Manual page 74

Section 4. Programming Reference
Special Notes
Horizontal
Page 4-30
1. Use the Print Position commands (V and H) to locate the new area
for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axes will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
aaaa
cccc
Vertical
bbbb
dddd
9001069A
CT400
0001
to
0832
0001
to
3200
CT410
0001
to
1248
0001
to
4800
SATO CT Series Printers