Cut Last - SATO CT400 Operator And Technical Reference Manual

Command Structure
Command Function
Input to Printer:
Printer Output:
Feed A to cut
Notes
SATO CT Series Printers

Cut Last

<ESC>YC
Example: <ESC>YC
Placement: Separate data stream sent to the printer
Default: None
To control the cutting of labels when using a SATO cutter unit with
the printer. This command allows the cutting of a printed multi-part
tag or label that is left in the printer after a job is cut using the
<ESC>CT Cut command.
<ESC>A
<ESC>YC
<ESC>Z
This command will cut the feed the last printed label to the cut
position, cut the label and then backfeed to the head position in
preparation for printing the next job.
Cut position Head position
Label A printed
Labels B, C, D
unprinted.
A
position
Cut A
Backfeed to
place B at print
position
1. You must have the optional printer Cutter to use this function.
Contact your SATO representative for more information.
9001069A
Section 4. Programming Reference
A B
B C
B C
B
C
D
D
D
C
Page 4-33