SATO CT400 Operator And Technical Reference Manual page 165

Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION
$a,b,c,d Vector font. Specifies printing of the unique SATO vector font.
a
b
c
d
$=(data) Data for Vector font .
#Eab Print Darkness. Specifies a new print darkness setting.
a
b
(aaaa,bbbb Reverse Image. Reverse image from black to white and vice versa.
Units of measure are dots.
aaaa = Horizontal Length
bbbb = Vertical Length
& Store Form Overlay. Stores a specified label image in the printer's
volatile form overlay memory.
/ Recall Form Overlay. Recalls the label image from the printer's form
overlay memory for printing.
0 (zero) Replace Data (Partial Edit). Provides the ability to replace a specified
area of the previous label with new data.
*a Clear Print Job(s) and Memory. Clears individual memory and
buffers.
a
a
@ Off-Line. Signals the printer to go off-line after the completion of a print
job.
Page A-10
= A Helvetica Bold (proportional spacing)
B Helvetica Bold (fixed spacing)
= Font width (50-999 dots*)
= Font height (50-999 dots*)
= Font variation (0-9) as follows:
0 Standard
1 Standard open (outlined)
2 Gray (mesh) pattern 1
3 Gray (mesh) pattern 2
4 Gray (mesh) pattern 3
5 Standard, shadow 1
6 Standard, shadow 2
7 Standard mirror image
8 Italic
9 Italic open (outlined)
= Print Darkness Range (A to F)
= Print Darkness Level (1 to 5)
= When not included in command, clears print jobs in
Multi-Buffer mode.
= If included in command, specifies memory section to be cleared
T Custom character memory, printer
& Form overlay memory, printer
X Clears all memory all memory and buffers
9001069A
CT400 CT410
0001-0832 0001-1248
0001-3200 0001-4800
SATO CT Series Printers
PAGE
Page 4-38
Page 4-38
Page 4-57
Page 4-65
Page 4-43
Page 4-42
Page 4-63
Page 4-27
Page 4-55