SATO CT400 Operator And Technical Reference Manual page 163

Appendix A: Command Quick Reference
INSTRUCTION DESCRIPTION
RDabb,ccc,ddd, Raster Font. Stored raster font select.
nn . . . n a
bb
cccc =
dddd
RFaabbbb,nn..n Font/Graphic Recall. Recalls a stored font or graphic.
aa
bbbb =
nn..n =
S Font type. Specifies the 8W x 15H dot matrix font (including
descenders).
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer's volatile memory. See Kab90cc to
recall the character for printing.
a
b
cc
(data) =
U Font type. Specifies a 5W x 9L dot matrix font (including descenders).
Vbbbb Vertical Position. Specifies a field's vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
bbbb = New Vertical Position
WBa Font type. Specifies the 18W x 30L dot matrix font (including
descenders).
a
WDHaaaaVbbbb Copy Image Area. To copy an image to another location of the label.
XccccYdddd aaaa =
bbbb =
cccc =
dddd =
WKnn . . n Job Name. ASCII characters identifying the job name.
nn...n =
Page A-8
= A CG Times
B CG Triumvirate
= 00 Normal
01 Bold
Horizontal size. (16 to 999 dots or P08 to P72 points)
Vertical size. (16 to 999 dots or P08 to P72 points)
= Font ID number (00 to 99)
Number of characters to print (0000 to 9999)
Data to be printed
= 1 16 x 16 matrix
2 24 x 24 matrix
= Specifies data stream format to follow
B Binary
H Hexadecimal
= Memory location to store the character.
Valid locations are 21 to 52 or "!" to "R" in hex values.
Data to describe the character.
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Horizontal position of the top left corner of image area
Vertical position of the top left corner of image area
Horizontal length of image area
Vertical length of image area
Up to 16 ASCII characters
9001069A
CT400 CT412
0001-3200 0001-4800
SATO CT Series Printers
PAGE
Page 4-37
Page 4-36
Page 4-34
Page 4-19
Page 4-34
Page 4-58
Page 4-40
Page 4-29
Page 4-50