SATO CT400 Operator And Technical Reference Manual page 89

Printer Output
Special Notes
SATO CT Series Printers
1. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
2. A custom graphic cannot be enlarged by the <ESC>L Character
Expansion command .
3. A custom graphic is not affected by either of the Rotation
commands. Therefore, always design and locate your graphic
image to print in the appropriate orientation.
4. The binary format reduces the transmission time by 50%.
9001069A
Section 4. Programming Reference
Page 4-45