Section 4. Programming Reference
Printer Output
Special Notes
Page 4-20
1. When printing the custom character using the Recall command, the
character is affected by the following commands:
Character Expansion
Character Pitch
Line Feed
Rotate, Base Reference Point Fixed
Rotate, Moving Base Reference Point
2. The characters are stored in volatile memory and must be reloaded
if the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
9001069A
SATO CT Series Printers