SATO CT400 Operator And Technical Reference Manual page 162

INSTRUCTION DESCRIPTION
OA Font type. Specifies the OCR-A font with dot matrix.
OA Font Matrix
OB Font type. Specifies the OCR-B font dot matrix.
OB Font Matrix
Paa Character Pitch. Designates the number of dots between characters.
aa
PGa.....z Printer Setting. Sets the printer default operating parameters into
EEPROM. See Section 4: Programming Reference for details.
PMa Print Mode. Sets the Print Mode for the current job.
a
PHa Print Type. Sets the Print Type for the current job.
a
P0 Pitch Offset. Sets the pitch offset to be used for the current job.
a
b
cc
PR Fixed Character Spacing. Returns the printer to fixed character
spacing mode.
PS Proportional Character Spacing. Places the printer in the
proportional character spacing mode. Will not work with U Font.
Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa
SATO CT Series Printers
15W x 22H
20 W x 24H
= Number of dots between characters (01-99)
= 0 Continuous print
1 Tear-Off
2 Cut, Backfeed after print
3 Cut, Backfeed before print
4 Cut, no backfeed
5 Reserved
6 Reserved
7 Dispense, Backfeed after print
8 Dispense, Backfeed before print
= 0 Thermal transfer printing
1 Direct thermal printing
= 0 Use Cut offset
1 Use Dispense offset
2 Use Tear-off offset
3 Continuous print.
= + Positive offset
- Negative offset
= Offset value in dots (00 to 99)
= Total number of labels to print for the job
(000001-999999)
9001069A
Appendix A: Command Quick Reference
CT400 CT410
22W x 33H
CT400 CT410
30W x 36H
PAGE
Page 4-34
Page 4-34
Page 4-24
Page 4-83
Page 4-86
Page 4-87
Page 4-88
Page 4-23
Page 4-26
Page 4-60
Page A-7