SATO CT400 Operator And Technical Reference Manual page 164

INSTRUCTION DESCRIPTION
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
XLa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a
YC Cut Last. Cuts last printed label and retracts head to print position.
YEa Label/Tag Select. Selects the operation of the "Paper Out" signal.
a
Z Stop Code. Ends all print jobs.
%a Rotate. Fixed Base Reference Point. Rotates printing in 90°
increments without changing the base reference point.
a
SATO CT Series Printers
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
= 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
= 0 Label selection. Print tops upon detection of Paper Out.
1 Tag selection. Print stops after label is printed.
= 0 Sets print to normal direction
1 Sets print to 90° CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW (90° CW)
9001069A
Appendix A: Command Quick Reference
PAGE
Page 4-40
Page 4-34
Page 4-34
Page 4-34
Page 4-40
Page 4-40
Page 4-33
Page 4-51
Page 4-70
Page 4-67
Page A-9