Xantrex Freedom SW 230V Installation Manual page 36

Installing the Inverter/Charger
Figure 5 Mounting Orientations
Orientation
Desktop Mount
Upside-down Mount
Wall Mount DC on Left
22
Inverter Inverter AC/
Reset Enable
On Charge Fault
Xanbus Interface
A
Inverter
Reset Enable Inverter AC/
On Charge Fault
Xanbus Interface
B
A B
Approved Mounting
Orientation? Comment
A - Yes A - Suitable only for non-marine
applications with no risk of condensation or
dripping water.
B - Yes when used with B - The drip shield is installed on top of the
inverter drip shield inverter with some clearance. See "Drip
(PN: 808-9004) for Shield Placement (Desktop Mount)" on
marine installations. page 69.
Yes (for non-marine Suitable only for non-marine applications
applications only) with no risk of condensation or dripping
water.
A - Yes A - On a vertical surface with DC terminals
facing left.
B - Yes when used with B - On a vertical surface with DC terminals
inverter drip shield facing left with the front panel facing up.
(PN: 808-9004) for The drip shield is installed on top of the
marine installations. inverter with some clearance. See "Drip
Shield Placement (Inverter Front Panel
Facing Up)" on page 69.
Freedom SW 230V Installation Guide