8.2
Setup
System configuration
This section shows the setting for configuring a sample system including the following devices and software.
(1)
Device/Software
(1)
Programmable
Main base unit
controller system
Power supply module
CPU module
MES interface module
SD memory card
(2)
Twisted pair cable and hub
(3)
Personal computer (shared in a server and
configuration personal computer)
Operating system
Relational database
Engineering tool
GX Works3
MX MESInterface-R
MES Interface Function
Configuration
Configuration Tool
software
DB Connection Service
DB Connection Service
Setting Tool
• The IP address of an MES interface module is '192.168.3.3'.
• The IP address of a personal computer is '192.168.3.100'.
To set a setting of an CPU module, connect a personal computer and the CPU module with a USB cable.
(2)
(3)
Product name/description
R35B
R61P
R08CPU
RD81MES96
NZ1MEM-nGBSD ('n' indicates a number of
bytes.)
A cable and a hub compliant with IEEE802.3
1000BASE-T/100BASE-TX/10BASE-T
standards
A personal computer on which Windows
operates
Microsoft Windows 7 Professional Operating
System (64-bit version)
Microsoft Access 2010 (32-bit version)
SWnDND-GXW3 ('n' indicates its version.)
SW1DND-RMESIF-E
DB
Reference
MELSEC iQ-R Module Configuration
Manual
Page 23 Accessible CPU modules
Page 58 Connectable SD memory cards (sold
separately)
Page 69 Connectable twisted pair cables
(sold separately)
Page 66 Operating Environment
GX Works3 Installation Instructions
GX Works3 Operating Manual
Page 62 Software configuration of MX
MESInterface-R
Page 71 INSTALLATION AND
UNINSTALLATION
8 OPERATION EXAMPLE
8
75
8.2 Setup