Network setting for connection
The following shows the network setting for a configuration personal computer when connecting the computer to an MES
interface module via a hub.
Operating procedure
1.
Set the network setting for a configuration personal computer to the same network address as MES interface module.
Network part
192.168.3.
IP address
Subnet mask
255.255.255.
Default value of MES interface module
2.
Set the network setting for the configuration personal computer on the "Internet Protocol Version 4 (TCP/IPv4)
Properties" screen.
5 SYSTEM CONFIGURATION
64
5.1 System Configuration
Set a same value
Host part
Network part
3
192.168.3.
0
255.255.255.
Configuration personal computer
Set a different value
Host part
1
0