System Configuration For The Initial Setting - Mitsubishi Electric RD81MES96 User Manual

System configuration for the initial setting

The following shows the system configuration for the initial setting, maintenance, and inspection.
Direct connection
(1)
(1) MES interface module
(2) Ethernet (twisted pair cable)
(3) Configuration personal computer
Connection via a hub
(1)
(1) MES interface module
(2) Ethernet (twisted pair cable)
(3) Configuration personal computer
(4) Hub
A MES interface module and a configuration personal computer can be connected directly or via a hub.
• For direct connection, the Ethernet port (CH1) of a MES interface module can directly be connected to a personal computer
on a 1:1 basis with an Ethernet cable (twisted pair cable) without a hub. The IP address of a MES interface module does
not need to be specified.
• For connection via a hub, the IP address of a MES interface module needs to be specified.
• For initial setting, only Ethernet port (CH1) can be used.
For using the Ethernet port (CH2), set the network in the "Network Settings" in MES Interface Function
Configuration Tool. (MELSEC iQ-R MES Interface Module User's Manual (Application))
(2)
(2) (2)
(4)
(3)
(3)
5 SYSTEM CONFIGURATION
5.1 System Configuration
5
63