Installation Procedure - Mitsubishi Electric RD81MES96 User Manual

7.1

Installation Procedure

MX MESInterface-R
The following shows the installation procedure of MES Interface Function Configuration Tool, DB Connection Service and DB
Connection Service Setting Tool.
Project File Conversion Tool is automatically installed when MES Interface Function Configuration Tool is installed.
Operating procedure
1.
Start the installer.
Double-click 'Setup.exe' in the DVD-ROM with the MX MESInterface-R product.
2.
Select the software to be installed, and click the [Install] button.
• When using Access for a database, select "32-bit".
• When selecting "64-bit", configure the ODBC setting which is supported by a 64-bit version DB connection service.
(Page 46 ODBC setting for database)
3.
Enter or select the necessary information according to the instructions shown on the screen.
■Windows firewall setting
Perform any of the following operations when the firewall function of the operating system and the security software are
enabled.
 Set the following programs to the firewall exception.
For the setting methods, refer to the manuals and online help of the operating system or security software used.
Program
MES Interface Function Configuration
*1
Tool
DB Connection Service Setting Tool
*1
DB Connection Service
*1 This setting is not required when the [Yes] button is selected on the screen below.
*2 For MX MESInterface-R whose software version is "1.03D" or earlier is installed
 Disable the firewall function.
7 INSTALLATION AND UNINSTALLATION
72
7.1 Installation Procedure
Execution file storage destination (operating system is a 64-bit version)
• C:\Program Files(x86)\MELSOFT\RMESIF\RMIFConfigTool.exe
*1
• C:\Program Files\MELSOFT\MESIF\DBCnctConf2_64.exe or C:\Program
Files(x86)\MELSOFT\MESIF\DBCnctConf2_32.exe
• C:\MELSEC\MESIF\DBCnctConf.exe
• C:\Program Files\MELSOFT\MESIF\DBConnector2_64.exe or C:\Program
Files(x86)\MELSOFT\MESIF\DBConnector2_32.exe
• C:\MELSEC\MESIF\DBConnector.exe
• C:\Program Files\MELSOFT\MESIF\DBCnctClient2_64.exe or C:\Program
Files(x86)\MELSOFT\MESIF\DBCnctClient2_32.exe
• C:\MELSEC\MESIF\DBCnctClient.exe
*2
*2
*2