Operation Check - Mitsubishi Electric RD81MES96 User Manual

Operation check

The following shows the writing procedure of parameters to MES interface module and checking procedure of the writing
result to a DB table.
Writing procedure of parameters to MES interface module
Checking procedure of a writing result to a DB table
8 OPERATION EXAMPLE
98
8.5 MES Interface Function Setting
1.
Write the parameters, which have been set with the
MES Interface Function Configuration Tool, to MES
interface module.
Select [Online]  [Write to MES Interface Module] in
MES Interface Function Configuration Tool.
2.
When the "Specify Connection Destination" screen
appears, enter a user name and password, then click
the [OK] button.
The following are set by default.
User Name: RD81MES96
Password: MITSUBISHI
3.
After completing the writing, reset the CPU module and
start MES interface module.
After resetting the CPU module, turn the status to RUN.
4.
The parameters are written to the database
automatically after starting MES interface module.
1.
Select "Open" in Access 2010 and open the
"Sample_DB.accdb" file ("C:\MES\Sample_DB.accdb").
2.
Right-click "History" in the [Tables] and select [Open]
from the shortcut menu.