Beckman Coulter Avanti J-E Instruction Manual page 46

Operation
Action
1. Press [
PROGRAM
2. Select the appropriate keypad
number and press [
3. Press [
SHOW SET
program parameters.
4. To begin the run, press
[ ] and [
ENTER
Changing a Program
Action
1. Press [
PROGRAM
2. Select the appropriate keypad
number and press [
3. Press [
SHOW SET
program parameters.
4. Press the run parameter key
to be changed.
5. Use the keypad to enter the
new value.
6. Repeat steps 4 and 5 to
change other run parameters.
When all changes have been
entered, press [
7. Press [
ENTER
begin the programmed run
(or press [
PROGRAM
program mode and return to
manual operation).
3-12
Result
]. Previously saved program numbers in use are displayed.
The message "Press [
]. displayed.
ENTER
] to display
The run starts.
].
START
Result
]. Previously saved program numbers are displayed.
The message "Press [
]. displayed.
ENTER
] to display
Parameter prompts are displayed.
The revised program will remain in memory until further changes
are made and saved. Record the changes on your Program Library
record (233679).
].
SAVE
] and [ ] to The run starts.
START
] to exit
] [ ] to run, or edit parameters" is
ENTER START
] [ ] to run, or edit parameters" is
ENTER START