Reset - wtw inoLab Cond Level 1 Operating Manual

Basic settings
4.6

Reset

The following functions are reset (initialized) to the values
they had on delivery:
Measuring mode
Cell constant
Temperature compensation
Reference temperature
Temperature coefficient of the lin-
ear temperature compensation
TDS factor
Proceed as follows:
1 Press and hold down the
c
2 Press the
3 Toggle between no and YES by pressing
YES: reset parameters.
no: retain settings.
4 Confirm with
The instrument changes automatically to the measur-
ing mode.
0.475 cm
0.475 cm
nLF
2.000 %/K
1.00
g
key.
key.
g
.
Operation
-1
(calibrated)
-1
(set up)
u d
.
35