Configuration - wtw inoLab Cond Level 1 Operating Manual

Operation
32
4.5

Configuration

You can adapt the conductivity meter to your individual re-
quirements. To do this, the following parameters can be
changed:
l Reference temperature 20 °C or 25 °C
l Conductivity measurement or resistance measurement
l °C or °F
1 Switch off the instrument.
2 Press and hold down the
e
3 Press the
The display test appears briefly on the display.
The instrument then switches automatically to the
setting of the reference temperature.
Note
You can leave the configuration menu at any time. Parame-
ters that have already been changed are stored.
To do this, press the
m
key.
key.
m
key.