wtw inoLab Cond Level 1 Operating Manual page 33

Setting the
reference
temperature
Conductivity and
resistance
measurement
The reference temperature can either be set to 25 °C
to 20 °C .
On delivery, the measuring instrument is set to 25 °C.
u d
1 With
2 Confirm with
The instrument changes to the next setting mode.
On delivery, the measuring instrument is set to conductivity
measurement.
u d
3 With
4 Confirm with
The instrument changes to the next setting mode.
toggle between t25
g
.
toggle between S/cm and M
g
.
Operation
or
and t20
.
Ω.
33