wtw inoLab Cond Level 1 Operating Manual page 18

Operation
AutoRead AR
(Drift control)
18
The AutoRead function (drift control) checks the stability of
the measurement signal. The stability has a considerable ef-
fect on the reproducibility of the measured values.
1 Call up the required measuring mode by
m
pressing
2 Activate the AutoRead function by pressing
The current measured value is frozen (Hold function).
3 Start the AutoRead function by pressing
AR flashes on the display until a stable measured val-
ue is reached.
4 If necessary, start the next AutoRead measurement
by pressing
5 To terminate the AutoRead function: Press the
key.
Note
The current AutoRead measurement (with acceptance of
the current value) can be terminated at any time by
g
pressing .
.
g
.
a
.
g
.
a