Bus Parameter Read (Readvalue: Server) - Mitsubishi Electric A1SJ71PB96F User Manual

7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.2.9
Use ReadValue to read the AJ71PB96F/A1SJ71PB96F bus parameters from the client.
[Parameters required by the client]
• Variable Identifier

Bus parameter read (ReadValue: Server)

Parameters types for reading the Variable Identifier
Vriable Identifier
1 Address
2 Baud Rate
3 Medium Red
4 HW-Release
5 SW-Release
6 Tsl
7 Min Tsdr
8 Max Tsdr
9 Tqui
10 Tset
11 Ttr
12 G
13 In Ring Desired
14 HSA
15 Max Retry Limit
16 LAS
Address
Baud rate
Transmission circuit redundant support
Hardware release number
Software release number
Slot time
Minimum response delay time
Maximum response delay time
Quiet time
Setup time
Target token rotation time
Gap update rate
Token ring subscription allowed/not allowed
Master station maximum addresses
Maximum number of retries.
Master station list
7-36
MELSEC-A
Explanation