Mitsubishi Electric A1SJ71PB96F User Manual page 82

6. COMMUNICATIONS THAT REQUIRE THE SEQUENCE PROGRAM
Explanation
*1 For details regarding error codes, refer to the Appendix.
*2 Always set to 1 when the access mode is name.
*3 OD flag
*4 Variable type
*5 Number of elements
*6 Data type
*7 Data length (byte)
*8 Data length (word)
*9 Buffer memory address
(2) Receive data area
(2-1) When the receive area OD flag is FFFFh.
The data is set unchanged in this area without the receive data that used the OD being
interpreted.
The data is set as follows. (The same as for OctetString.)
When the value is 01h, 02h, 03h, 04h, 05h, 06h, the settings are as follows.
(2-2) When the receive area OD flag is not FFFFh.
The same as for the Write data area.
1536 02 01
1537 04 03
1538 06 05
6-21
MELSEC-A