Table of Contents
Advertisement
8. TROUBLESHOOTING
(b) Initiate
(c) Abort
Error
Description
code
2055h
A FMS refusal answer is received.
2061h
An initiate request to the partner station for
which a connection has already been
established was sent.
2062h
An incorrect connection No. was specified.
2067h
An error during the request transmission.
2071h
A connection establishment request is sent
from other than the master station.
Error
Description
code
2209h
An error during request transmission.
220Bh
An abort prohibit connection is specified.
8-3
MELSEC-A
Counter measure
Refer to the error information and then check
the data set in the buffer memory.
Set the correct connection No.
Set a connection No. that is defined in the
connection setting table.
Comprehensively investigate the
transmission parameters and error
information.
Establish a connection from the master
station.
Counter measure
Comprehensively check the transmission
parameters and error information.
Use the SW0IX-PROFPE to abort the
connection.
Advertisement
Table of Contents
