Initiate Objects Attribute Setting (Initiateputod: Server) - Mitsubishi Electric A1SJ71PB96F User Manual

7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.1.7
The three services of InitiatePutOD, PutOD, and TerminatePutOD are used by the AJ71PB96F/
A1SJ71PB96F to set the object attributes in the OD.
Note
As far as possible, make the write OD the OD acquired using GetOD from the AJ71PB96F/
A1SJ71PB96F.
If there is a error with the write OD at worst communication cannot be conducted.
If this happens, use the software package to rewrite the OD.
InitiatePutOD is used to announce the start of OD setting.

Initiate objects attribute setting (InitiatePutOD: Server)

Server
TerminatePutOD.response
InitiatePutOD.request
InitiatePutOD.response
PutOD.reques
PutOD.response
. .
.
(Repeated)
PutOD.reques
PutOD.response
TerminatePutOD.reques
7-11
MELSEC-A
Clien